7
8
1
2
4
3
6
5
Use the To
1 USB port Attach an optional wireless network adapter or optional printer hard disk.
2 Security slot Attach a lock to secure the printer in place.
3 Power cord socket Connect the printer to a properly grounded electrical outlet.
4 LINE port Connect the printer to an active telephone line through a standard wall jack (RJ‑11), DSL
filter, or VoIP adapter, or any other adapter that allows you to access the telephone line
to send and receive faxes.
5 EXT port Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer and
if this connection method is supported in your country or region.
Note: Remove the plug to access the port.
6 USB port Attach a keyboard or any compatible options.
7 USB printer port Connect the printer to a computer using a USB cable.
8 Ethernet port Connect the printer to an Ethernet network.
Setting up the printer software
Installing the printer software
1 Obtain a copy of the software installer package.
• From the software CD that came with your printer.
• Go to http://support.lexmark.com, and then select your printer and operating system.
Additional printer setup 37
To Next Page
Loading...
