Lexmark CX860 Series User Manual

Action Yes No
Step 1
a Move the paper guides in the tray to the correct position for the
paper loaded.
b Resend the print job.
Are the margins correct?
The problem is
solved.
Go to step 2.
Step 2
a Depending on your operating system, specify the paper size
from the Printing Preferences or Print dialog.
Notes:
• Make sure that the settings match the paper loaded in
the tray.
• You can also change the settings on the printer control
panel.
b Resend the print job.
Are the margins correct?
The problem is
solved.
Contact
customer
support.
Jagged or uneven characters
Action Yes No
a Check if the printer supports the fonts that are installed on your
computer.
1 From the control panel, touch:
Settings > Reports > Print > Print Fonts
2 Select PCL Fonts or PS Fonts.
b If the font is not supported, then install a supported font. For
more information, contact your administrator.
c Resend the print job.
Do prints still contain jagged or uneven characters?
Contact
customer
support.
The problem is
solved.
Troubleshooting 146

Lexmark CX860 Series Specifications

General

Print Technology	Color Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Letter, Black)	60 ppm
Print Speed (Letter, Color)	60 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	1.6 GHz
Standard Output Capacity	500 sheets
Print Speed (Black/White)	60 ppm
Print Speed (Color)	60 ppm
Monthly Duty Cycle	350000 pages
Recommended Monthly Page Volume	5, 000 - 50, 000 pages
Maximum Output Capacity	500 sheets
Display	10-inch Color Touchscreen
Connectivity	Ethernet, USB, Wi-Fi
Mobile Printing	Mopria, AirPrint
Standard Input Capacity	650 sheets