Lexmark CX860 Series User Manual

4 Push the card firmly into place.
Note: The entire length of the connector on the card must touch and be flush against the controller
board.
Warning—Potential Damage: Improper installation of the card may cause damage to the card and the
controller board.
5 Reattach the access cover.
6 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of
fire
or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Installing a printer hard disk
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them o as well, and unplug any cables going into the
printer.
1 Turn o the printer, and then unplug the power cord from the electrical outlet.
2 Using a
flat
‑head screwdriver, remove the controller board access cover.
Upgrading and migrating 172

Lexmark CX860 Series Specifications

General

Print Technology	Color Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Letter, Black)	60 ppm
Print Speed (Letter, Color)	60 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	1.6 GHz
Standard Output Capacity	500 sheets
Print Speed (Black/White)	60 ppm
Print Speed (Color)	60 ppm
Monthly Duty Cycle	350000 pages
Recommended Monthly Page Volume	5, 000 - 50, 000 pages
Maximum Output Capacity	500 sheets
Display	10-inch Color Touchscreen
Connectivity	Ethernet, USB, Wi-Fi
Mobile Printing	Mopria, AirPrint
Standard Input Capacity	650 sheets