Lexmark CX860 Series User Manual

5 Reattach the access cover.
6 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Installing optional trays
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them o as well, and unplug any cables going into the
printer.
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, see
www.lexmark.com/multifunctionprinters.
1 Turn o the printer.
2 Unplug the power cord from the electrical outlet, and then from the printer.
3 Unpack the optional tray, and then remove all packing material.
4 Lift the printer using the side and rear handles.
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or
more trained personnel to lift it safely.
Upgrading and migrating 175

Lexmark CX860 Series Specifications

General

Print Technology	Color Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Letter, Black)	60 ppm
Print Speed (Letter, Color)	60 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	1.6 GHz
Standard Output Capacity	500 sheets
Print Speed (Black/White)	60 ppm
Print Speed (Color)	60 ppm
Monthly Duty Cycle	350000 pages
Recommended Monthly Page Volume	5, 000 - 50, 000 pages
Maximum Output Capacity	500 sheets
Display	10-inch Color Touchscreen
Connectivity	Ethernet, USB, Wi-Fi
Mobile Printing	Mopria, AirPrint
Standard Input Capacity	650 sheets