Lexmark CX922 User Manual

Menu item Description
Enable FTP/TFTP
O
On*
Send files using FTP/TFTP.
Local Domains Specify domain names for HTTP and FTP servers.
HTTP Proxy IP Address Configure the HTTP and FTP server settings.
FTP Proxy IP Address
HTTP Default IP Port
HTTPS Device Certificate
FTP Default IP Port
Timeout for HTTP/FTP
Requests
1–299 (30*)
Specify the amount of time before the server connection stops.
Retries for HTTP/FTP Requests
1–299 (3*)
Set the number of retries to connect to the HTTP/FTP server.
Note: An asterisk (*) next to a value indicates the factory default setting.
ThinPrint
Menu item Description
Enable ThinPrint
O*
On
Print using ThinPrint.
Port Number
4000–4999 (4000*)
Set the port number for the ThinPrint server.
Bandwidth (bits/sec)
100–1000000 (0*)
Set the speed to transmit data in a ThinPrint environment.
Packet Size (kbytes)
0–64000 (0*)
Set the packet size for data transmission.
Note: An asterisk (*) next to a value indicates the factory default setting.
USB
Menu item Description
PCL SmartSwitch
O
On*
Set the printer to switch to PCL emulation when a print job received through a USB port requires
it, regardless of the default printer language.
Note: When this setting is disabled, the printer does not examine incoming data and uses the
default printer language specified in the Setup menu.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 143

Lexmark CX922 Specifications

General

Print Technology	Color Laser
Duplex Printing	Integrated Duplex
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Scan Technology	CIS
Display	10-inch color touch screen
Memory	4 GB
Hard Disk	500 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Resolution	Up to 300 x 300 dpi
Network Connectivity	Ethernet, USB
Mobile Printing	Yes
Print Speed	Simplex: Black: 65 ppm, Color: 65 ppm; Duplex: Black: 65 ppm, Color: 65 ppm