Lexmark CX922 User Manual

Copying
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF) Scanner glass
• Use the ADF for multiple‑page or two-sided
documents.
• Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
• Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
• Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
• Place the document facedown in the corner with the
arrow.
Making copies
1 Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and output have the same paper
size.
2 From the home screen, touch Copy, and then specify the number of copies.
If necessary, adjust the copy settings.
3 Copy the document.
Note: To make a quick copy, from the control panel, press
.
Copying photos
1 Place a photo on the scanner glass.
2 From the home screen, navigate to:
Copy > Content > Content Type > Photo
3 In the Content Source menu, select the setting that best matches the original photo.
4 Copy the photo.
Copying 51

Lexmark CX922 Specifications

General

Print Technology	Color Laser
Duplex Printing	Integrated Duplex
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Scan Technology	CIS
Display	10-inch color touch screen
Memory	4 GB
Hard Disk	500 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Resolution	Up to 300 x 300 dpi
Network Connectivity	Ethernet, USB
Mobile Printing	Yes
Print Speed	Simplex: Black: 65 ppm, Color: 65 ppm; Duplex: Black: 65 ppm, Color: 65 ppm