Lexmark CX922 User Manual

10 Reattach the shield, and then reattach the access cover.
11 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Installing the 2 x 500‑ or 2500‑sheet tray
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them o as well, and unplug any cables going into the
printer.
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, see
www.lexmark.com/multifunctionprinters.
1 Turn o the printer.
2 Unplug the power cord from the electrical outlet, and then from the printer.
3 Unpack the tray, and then remove all packing material.
Upgrading and migrating 282

Lexmark CX922 Specifications

General

Print Technology	Color Laser
Duplex Printing	Integrated Duplex
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Scan Technology	CIS
Display	10-inch color touch screen
Memory	4 GB
Hard Disk	500 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Resolution	Up to 300 x 300 dpi
Network Connectivity	Ethernet, USB
Mobile Printing	Yes
Print Speed	Simplex: Black: 65 ppm, Color: 65 ppm; Duplex: Black: 65 ppm, Color: 65 ppm