Using the operator panel
56
Hex Trace Ready
Waiting
Light sequence:
• Ready—Slow blink
What this light sequence means:
The printer is in the Ready mode and Hex Trace is active.
What you can do:
• Advanced users can use Hex Trace to help troubleshoot
printing problems. After resolving the problem, turn off the
printer to exit Hex Trace.
• Press and hold Cancel to reset the printer.
Light sequence:
• Continue—On
• Ready—On
What this light sequence means:
The printer is waiting until a print timeout occurs, or until it receives
additional data.
What you can do:
• Press Continue to print the contents of the print buffer.
• Press and release Cancel to cancel the print job.
• Press and hold Cancel to reset the printer.
To Next Page
Loading...
