Using the operator panel
72
Font error
Network interface errors
Light sequence:
• Continue—On
• Toner Low/Replace PC Kit—Blink
• Error—On
What this light sequence means:
The printer has received a request for a PPDS font which is not
installed.
What you can do:
• Press and release Cancel to cancel the print job.
• Press and hold Cancel to reset the printer.
• Press Continue to clear the message and continue
printing.
Light sequence:
• Continue—On
• Paper Jam—On
• Error—On
What this light sequence means:
The printer cannot establish communication with the network.
What you can do:
Press Continue to clear the message and continue printing.
(The job may not print correctly.)
To Next Page
Loading...
