Using the operator panel
75
Short paper
Light sequence:
• Continue—On
• Ready—On
• Load Paper—On
• Error—On
What this light sequence means:
The paper length is too short to print the formatted data. This occurs
when the printer does not know the media size loaded in the tray, or
there is a problem feeding the media.
What you can do:
• Make sure the print media you loaded is large enough.
• Open the front cover, clear the paper path and close the cover
to resume printing (see “How to clear paper jams” on
page 26).
• Press Continue to clear the message and continue
printing the job.
• Press Cancel to cancel the print job.
To Next Page
Loading...
