30
How to clear paper jams
4 Lift the flap at the front of the printer, and remove any jams beneath the flap.
5 Open the rear exit, and remove any jams.
Warning: Fuser or area may be hot.
6 After you have cleared the jams, reinstall the print cartridge assembly, make sure all printer covers and trays are
closed, and then press Continue to resume printing.
Note: Jam recovery is set to Auto by default. When jam recovery is set to Auto, the memory that holds the
image of a page may be re-used after the page is printed but before it has successfully exited the
printer if that memory is needed for another use. Therefore, a jammed page may or may not be
reprinted, depending on the printer’s overall memory usage.
To Next Page
Loading...
