Lexmark E238 - Page 55

55
Operator panel codes
Photoconductor kit life warning
Replace photoconductor
Light sequence:
• Continue—On
• Toner Low/Replace PC Kit—Blink
What this light sequence means:
The photoconductor is almost full and will need replacing soon.
Note: The Toner Alarm (see page 74) must be turned on for this
message to appear.
What you can do:
• Press Continue to resume printing.
• Replace the photoconductor kit. See How to change a photoconductor
kit on page 82 for more information.
Light sequence:
• Toner Low/Replace PC Kit—Blink
What this light sequence means:
The photoconductor kit is full and needs replacing.
What you can do:
• Press Continue to resume printing.
• Replace the photoconductor kit. See How to change a photoconductor
kit on page 82 for more information.