Lexmark E238 - Page 58

58
Operator panel codes
Programming engine code / Programming system code
Cancel job / Reset printer
Light sequence:
• Ready—On
• Toner Low/Replace PC Kit—On
• Load Paper—On
What this light sequence means:
New code is being programmed into the engine or firmware code flash.
What you can do:
Wait for the message to clear. When the printer has finished programming the code,
it performs a soft reset.
Light sequence:
• Continue—On
• Ready—On
• Toner Low/Replace PC Kit—On
• Load Paper—On
• Paper Jam—On
• Error—On
What this light sequence means:
• The current print job is canceled.
• The printer is resetting to the user default settings. Any active print jobs are
canceled. A user default setting remains in effect until you change it or until
you restore the factory default settings.
What you can do:
Wait for the message to clear.