Diagnostic information 2-19
4512-220, -230
Insufficient defrag memory
ENA connection lost
Host interface disabled
z
✷ z
Meaning
The printer memory does not have the free space necessary to collate the print job. This may happen due to one of these
errors:
• Memory is full.
• A page is too complex to print.
• A page is shorter than the set page margins.
• Memory is insufficient to save what is in the buffer.
Action
•Press Continue to clear the message and continue printing the job. (The job may not print correctly.)
• Press and release Cancel to cancel the print job.
• Press and hold Cancel to reset the printer.
To avoid this error in the future:
• Simplify the print job. Reduce the complexity of the page by reducing the amount of text or graphics on the page
and deleting unnecessary downloaded fonts or macros.
• Install additional printer memory.
z
✷ z
Meaning
The printer cannot establish communication with the network.
Action
Press Continue to clear the code and continue printing. (The previous print job may not print correctly.)
z
✷✷ z
Meaning
The printer USB or parallel port has been disabled.
Action
Press Continue to clear the code. The printer discards any print jobs previously sent. Enable the USB or parallel port
by selecting a value other than Disabled for the USB Buffer or Parallel Buffer item in the Local Printer Settings Utility.
To Next Page
Loading...
