Diagnostic aids 3-1
4512-220, -230
3. Diagnostic aids
Accessing service menus
Printing menus
Print Configuration menus by pressing and holding until the lights flash, then release the button. The
Configuration Mode Instruction page will print.
Print Diagnostic menus by pressing and holding until the lights flash, then release the button. The Ready/
Data LED will blink when the page is being formatted and printed.
Note: The Configuration Mode Instruction page and Diagnostic menu page in this manual are samples only and
may not match your specific machine.
Moving around the menu
“Configuration Menu printout sample” on page 3-2 and “Diagnostics mode printout sample” on page 3-3
are similar to the instructions printed by following steps 1—3 above. These menu items are designated by the
non-indented items listed along the left edge of the page (Bottom as printed from printer). These items are also
unshaded.
• Press and release to move sequentially from one menu item to another.
• Press and hold to jump to home state (top four lights on).
• Press and release to move through the menu settings (indicated by and lights).
• This action rotates only through the possible settings of the selected menu item.
Enter Configuration Menu 1. Turn off the printer.
2. Open the front access cover and
turn on the printer while pressing
and holding .
3. Close the cover once the light
displays.
The Configuration menu group contains a set of
menus, settings and operations which are
infrequently required by a user. Generally, the
options made available in this menu group are
used to configure a printer for operation.
See “Configuration Menu printout sample” on
page 3-2 or “Configuration menu selections”
on page 3-4 for details on the available settings.
Diagnostics mode 1. Turn off the printer.
2. Open the front access cover and
press and hold while turning on
the printer.
3. Close the cover when the light
displays.
The diagnostic group contains menu settings and
operations that are useful in the manufacturing of
the printer. It also features other aids in
diagnosing problems.
See “Diagnostics mode printout sample” on
page 3-3 or “Diagnostics mode selections” on
page 3-8 for details on the available settings.
To Next Page
Loading...
