Lexmark E250D - E B/W Laser Printer - Page 88

3-10 Lexmark™ E250d and E250dn
4512-220, -230
5. Press and hold until all of the lights cycle to print Step 2 test page.
6. Press and release to change the <BA> light sequence to the number beside the darkest portion of the
vertical bar.
7. Press and release to move to the <CA> light sequences on the right side of Step 2 test page.
8. Press and release to change the <CA> light sequence to the number beside the darkest portion of the
vertical bar.
See note on page 3-9. See note on page 3-9. z z <BA>
See note on page 3-9. See note on page 3-9.
z z
<CA>
z
Step 2 printout
(sample only; use actual sheet)