Lexmark E260 Series User Manual

RESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
Memory card
Make sure the memory card is securely connected to the printer system board.
Solving paper feed problems
Paper frequently jams
These are possible solutions. Try one or more of the following:
CHECK THE PAPER
Use recommended paper or specialty media. For more information, see “Paper and specialty media guide” on
page 51.
FLEX, FAN, AND STRAIGHTEN THE PAPER BEFORE LOADING IT IN THE TRAY
MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE TRAY
Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray.
CHECK THE GUIDES
Move the guides in the tray to the correct positions for the paper size loaded.
THE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY
• Load paper from a fresh package.
• Store paper in its original wrapper until you use it.
Paper jam lights remain on after jam is cleared
The paper path is not clear. Clear jammed paper from the entire paper path, and then close any open doors.
Troubleshooting
130

Lexmark E260 Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Output Capacity	150-sheet output bin
Duplex Printing	Manual
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Input Capacity	250-sheet input tray
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Media Sizes Supported	A4, A5, Letter, Legal, Executive, Folio, Statement
First Page Out Time	6.5 seconds
Recommended Monthly Page Volume	Up to 2500 pages
Weight	22.5 lbs