Lexmark E260 Series User Manual

Installing a memory card
CAUTION—SHOCK HAZARD: If you are installing internal options, memory cards, flash memory, or a firmware
card after setting up the printer, turn the printer off and unplug it from the wall outlet before continuing. If you
have other devices attached to the printer, then turn them off as well and unplug any cables going to the printer.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
An optional memory card can be purchased separately and attached to the system board. To install the memory
card:
1 Access the system board.
2 Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
3 Align the memory card with its connector on the system board. Push the latches on the connector open if they
are not open already.
Additional printer setup
16

Lexmark E260 Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Output Capacity	150-sheet output bin
Duplex Printing	Manual
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Input Capacity	250-sheet input tray
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Media Sizes Supported	A4, A5, Letter, Legal, Executive, Folio, Statement
First Page Out Time	6.5 seconds
Recommended Monthly Page Volume	Up to 2500 pages
Weight	22.5 lbs