Lexmark E260 Series User Manual

Menu item Description
TCP/IP
Enable FTP/TFTP
Yes
No
Lets you view or change the setting
Note: Yes is the factory default setting.
TCP/IP
Enable HTTP Server
Yes
No
Lets you view or change the setting
Note: Yes is the factory default setting.
TCP/IP
WINS Server Address
DNS Server Address
Lets you view or change the setting
Note: This is a four-field IP address.
IPv6 menu
Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information.
Note: This menu is available only for network models or printers attached to print servers.
Menu item Description
IPv6
Enable IPv6
On
Off
Enables IPv6 in the printer
Note: On is the factory default setting.
IPv6
Auto Configuration
On
Off
Enables the network adapter to accept the automatic IPv6 address
configuration entries provided by a router
Note: On is the factory default setting.
IPv6
View Hostname
View Address
View Router Address
Shows the setting
Note: These settings can be changed only from the Embedded Web
Server.
IPv6
Enable DHCPv6
Yes
No
Enables DHCPv6 in the printer
Note: Yes is the factory default setting.
AppleTalk menu
Menu item Description
Activate
Off
On
Activates or deactivates AppleTalk support
Note: On is the factory default setting.
Understanding printer menus
88

Lexmark E260 Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Output Capacity	150-sheet output bin
Duplex Printing	Manual
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Input Capacity	250-sheet input tray
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Media Sizes Supported	A4, A5, Letter, Legal, Executive, Folio, Statement
First Page Out Time	6.5 seconds
Recommended Monthly Page Volume	Up to 2500 pages
Weight	22.5 lbs