Lexmark E260 Series User Manual

Gray background
From the Quality menu, select a reduced Toner Darkness setting before sending the job to print. To access the Quality
menu, do one of the following:
• If the printer is on a network, access the Embedded Web Server by typing the printer IP address into the address
field of your Web browser. From the Settings tab, click Print Settings.
• If the printer is connected to a computer by a USB or parallel cable, open the Local Printer Settings Utility for
Windows or Printer Settings for Macintosh. One of these utilities installs with the printer software.
Ghost images
These are possible solutions. Try one or more of the following:
THE PHOTOCONDUCTOR KIT MAY BE DEFECTIVE
Replace the photoconductor kit.
CHECK THE PAPER SIZE AND PAPER TYPE SETTINGS
From the Paper menu, change the paper size and paper type settings to match the paper loaded in the tray. To
access the Paper menu, do one of the following:
• If the printer is on a network, access the Embedded Web Server by typing the printer IP address in the address
field of your Web browser. From the Settings tab, click Paper Menu.
• If the printer is connected to a computer by a USB or parallel cable, open the Local Printer Settings Utility for
Windows or Printer Settings for Macintosh. One of these utilities installs with the printer software.
Troubleshooting
133

Lexmark E260 Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Output Capacity	150-sheet output bin
Duplex Printing	Manual
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Input Capacity	250-sheet input tray
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Media Sizes Supported	A4, A5, Letter, Legal, Executive, Folio, Statement
First Page Out Time	6.5 seconds
Recommended Monthly Page Volume	Up to 2500 pages
Weight	22.5 lbs