Lexmark E360dn - User Manual

Lexmark™ E360
Quick Reference
Loading paper
Loading the standard 250-sheet
tray
The printer has two trays to select from: the standard tray (Tray 1),
also known as the 250-sheet tray, and either the optional
250-sheet tray or the optional 550-sheet tray (Tray 2). Only one
optional drawer (which includes an optional tray) may be attached
to the printer at one time.
Notes:
• Proper paper loading prevents jams and facilitates
trouble-free printing.
• Do not remove trays while a job prints or while Busy appears
on the display. Doing so may cause a jam.
1 Pull the tray completely out.
2 Squeeze the width guide tabs on the right guide as shown, and
slide the width guides to the sides of the tray. Notice that the
two width guides move in unison when you move just the right
width guide.
3 Squeeze the length guide tabs together as shown, and slide
the length guide to the correct position for the paper size being
loaded.
If you are loading a longer size of paper like A4 or legal, squeeze
the length guide tab and slide the length guide backwards to
the position for the length of paper you are loading. The tray
extends backwards as shown.
If you are loading A6-size paper:
a Squeeze the length guide tab shown as follows, and slide
the length guide toward the center of the tray to the A5
size position.
b Raise the A6 backstop.
Note: The standard tray only accommodates 150 sheets of A6
paper. Notice the maximum fill line on the A6 backstop which
indicates the maximum height for loading A6 paper. Do not try to
overload the tray.
1

Lexmark E360dn Specifications

General

Brand	Lexmark
Model	E360dn
Category	Printer
Language	English

Summary

Loading Paper

Loading the Standard 250-Sheet Tray

Instructions for loading paper into the printer's standard 250-sheet tray, including guide adjustments.

Loading Optional Trays

Loading the Optional 250- or 550-Sheet Tray

Procedure for inserting the optional 250-sheet or 550-sheet tray (Tray 2) into the printer.

Using the Multipurpose Feeder

Opening the Multipurpose Feeder

Steps to open the multipurpose feeder, including extending the paper support.

Multipurpose Feeder Operations

Loading the Multipurpose Feeder

Guidance on preparing and loading paper or specialty media into the multipurpose feeder.

Setting Paper Size and Type

Printing and Job Management

Printing a Document

Instructions for loading paper and setting print parameters for Windows and Macintosh users.

Canceling a Print Job

Steps to cancel a print job directly from the printer's control panel.

Printer Maintenance

Replacing the Photoconductor Kit

Procedure for replacing the photoconductor kit and resetting the counter.

Replacing the Toner Cartridge

Instructions for removing and installing a new toner cartridge to maintain print quality.

Cleaning the Printer Exterior

Guidelines for safely cleaning the outside of the printer with a damp cloth.