Attaching cables
1 Connect the printer to a computer or a network.
• For a local connection, use a USB or parallel cable.
• For a network connection, use an Ethernet cable.
2 Connect the power cord to the printer first and then to a properly grounded wall outlet.
1
Ethernet port
2 USB port
Warning—Potential Damage: Do not touch the USB cable, any network adapter, or the printer in the area shown
while actively printing. A loss of data or a malfunction can occur.
3
Parallel port
Note: If your printer is a wireless model, the wireless antenna is attached here.
4 Power cord socket
Additional printer setup
28
To Next Page
Loading...
