Set Date/Time menu
Menu item Description
View Date/Time
Lets you view the current date and time settings for the printer. The format for the
date and time is: YYYY-MM-DD HH:MM:
YYYY is the four-digit year
MM is a two-digit month
DD is a two-digit date
HH is a two-digit hour
MM is a two-digit minute
Set Date/Time
Lets you enter the date and time
Note: Date/Time is set in YYYY-MM-DD HH:MM format.
Time Zone
<list of time zones>
Lets you select the time zone
Note: GMT is the factory default setting.
Observe DST
On
Off
Sets the printer to use the applicable Daylight Saving Time (DST) start and end times
associated with the printer Time Zone setting.
Note: On is the factory default setting.
Enable NTP
On
Off
Enables Network Time Protocol, which synchronizes the clocks of devices on a
network
Note: On is the factory default setting.
Understanding printer menus
96
To Next Page
Loading...
