Use the To
1
Scanner glass Scan and copy photos and documents.
2 Power supply with port Connect the printer to a power source.
3
USB port Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when plugging in or
removing a USB cable or installation cable.
4
Printhead access Install the printhead.
Note: The carrier moves to the printhead access area when no printhead is installed in
the printer.
5
Ink cartridge access Install, replace, or remove ink cartridges.
6
Scanner unit
• Access the ink cartridges and printhead.
• Remove paper jams.
About your printer
10
To Next Page
Loading...
