Use the: To
9
Back button
• Return to the previous screen.
• Exit from one menu level to a higher one.
10 Setup button Access the setup menu and change printer settings.
Note: The Copy, Scan, Fax, and Photo button lights are off
when this button is selected.
Use the: To
1 Address Book
Access fax numbers from a saved list of numbers.
2 Redial/Pause
In Fax mode:
• Insert a three-second pause in a fax number to wait for an outside line or get through an
automated answering system. Enter a pause only when you have already begun entering the
number.
• Display the last number dialed. Press the left or right arrow button to view the last five numbers
dialed.
3 Dialtone Dial the telephone number manually using the keypad before sending the fax.
4 Color/Black
Switch to color mode or black-and-white mode.
5
Start button Start a print, scan, fax, or copy job, depending on which mode is selected.
6 Cancel button
• Cancel a print, copy, scan, or fax job in progress.
• Exit from a menu level of the Copy, Scan, Fax, Photo, or File Print menu to the top level of a
menu.
• Exit from a menu level of the Setup menu to the top level of the previous mode.
• Clear current settings or error messages, and return to default settings.
About your printer
11
To Next Page
Loading...
