Use To
8 2-Sided/Eco-Mode Activate 2-Sided to:
• Print on both sides of the paper (duplex).
Activate Eco-Mode to:
• Print on both sides of the paper (duplex).
• Change to Power Saver mode after the printer is left idle
for 10 minutes.
• Set screen brightness to low.
9 Cancel
• Cancel a print, copy, or scan job in progress.
• Exit from a menu level of the Copy, Scan, Photo, or File
Print menu to the top level of a menu.
• Exit from a menu level of the Setup menu to the top level
of the previous mode.
• Clear current settings or error messages, and return to
default settings.
10 Arrow buttons
• Choose a menu or submenu item that appears on the
display.
11 Select
• Select menu options.
• Save settings.
• Feed or eject paper. Press and hold for 3 seconds to feed
or eject paper from the printer.
12 Display
Note: The display is turned off in Power Saver mode.
View:
• Printer status
• Messages
• Menus
13 Setup Access the setup menu and change printer settings.
Note: The Copy, Scan, and Photo button lights are off when
this button is selected.
Changing temporary settings into new default settings
The following menus revert to default settings after two minutes of inactivity or after the printer is turned off:
Copy menu
• Copies
• Quality
• Resize
• Lighter/Darker
• Collate
• Photo Reprint
• Pages per Sheet
• Original Size
• Copies per Sheet
• Content Type
Using the printer control panel buttons and menus
16
To Next Page
Loading...
Need help?
General
