Lexmark MB2338 - Troubleshooting

Error code Description Action
242.33 Paper fed from tray 3 never reached the sensor
(tray 2 pass-through).
See
“Optional tray sensor (tray x pass-through)
jam at leading edge service check” on
page 107.
242.35 Paper fed from tray 3 cleared the sensor (tray 2
pass-through) later than expected.
See
“Optional tray sensor (tray x pass-through)
jam at trailing edge service check” on
page 108.
242.37 Paper fed from tray 3 never cleared the sensor
(tray 2 pass-through).
242.41 Paper remains detected at the sensor (tray 2
pass-through) although the printer is idle. Tray 4
is the paper source.
See
“Optional tray sensor (tray x pass-through)
static jam service check” on page 106.
242.43 Paper fed from tray 4 never reached the sensor
(tray 2 pass-through).
See
“Optional tray sensor (tray x pass-through)
jam at leading edge service check” on
page 107.
242.45 Paper fed from tray 4 cleared the sensor (tray 2
pass-through) later than expected.
See
“Optional tray sensor (tray x pass-through)
jam at trailing edge service check” on
page 108.
242.47 Paper fed from tray 4 never cleared the sensor
(tray 2 pass-through).
242.82 The motor (tray 2 pick) has stalled. See
“Optional tray pick failure service check”
on page 108.
242.83 The motor (tray 2 pick) has stalled.
242.84 The motor (tray 2 pick) has stalled.
242.91 Paper remains detected at the sensor (tray 2
pass-through) after the printer is turned on.
See
“Optional tray sensor (tray x pass-through)
static jam service check” on page 106.
242.93 Paper never reached the sensor (tray 2 pass-
through). Paper source is undetermined.
See
“Optional tray sensor (tray x pass-through)
jam at leading edge service check” on
page 107.
242.95 Paper cleared the sensor (tray 2 pass-through)
later than expected. Paper source is
undetermined.
See
“Optional tray sensor (tray x pass-through)
jam at trailing edge service check” on
page 108.
242.96 Paper was picked but it never reached the
sensor (input). Paper source is undetermined.
See
“Optional tray sensor (tray x pass-through)
jam at leading edge service check” on
page 107.
242.97 Paper never cleared the sensor (tray 2 pass-
through). Paper source is undetermined.
See
“Optional tray sensor (tray x pass-through)
jam at trailing edge service check” on
page 108.
7017-2xx, -4xx, -6xx
Diagnostics and troubleshooting
104