Lexmark MC3224 User Manual

3 Attach the NFC card.
4 Turn on the printer.
Connecting the printer to a Wi‑Fi network
Before you begin, make sure that:
• Active Adapter is set to Auto. From the home screen, touch Settings > Network/Ports > Network Overview
> Active Adapter.
• The Ethernet cable is not connected to the printer.
Using the wireless setup wizard in the printer
Before using the wizard, make sure that the printer firmware is updated. For more information, see “Updating
firmware” on page 46.
1 From the home screen, touch > Set up now.
2 Select a Wi‑Fi network, and then type the network password.
3 Tou ch Done.
Using the Settings menu in the printer
1
From the home screen, touch Settings > Network/Ports > Wireless > Setup On Printer Panel > Choose
Network.
2 Select a Wi‑Fi network, and then type the network password.
Note: For Wi‑Fi‑network‑ready printer models, a prompt to set up the Wi‑Fi network appears during initial
setup.
Set up, install, and configure 49

Lexmark MC3224 Specifications

General

Print Technology	Color Laser
Print Speed (A4, Black)	22 ppm
Print Speed (A4, Color)	22 ppm
Print Resolution	600 x 600 dpi
Maximum Copy Speed (A4, Black)	22 cpm
Maximum Copy Speed (A4, Color)	22 cpm
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Connectivity	USB, Ethernet, Wi-Fi
Standard Input Capacity	250 sheets
Standard Output Capacity	100 sheets
Monthly Duty Cycle	Up to 30, 000 pages
Duplex Printing	Yes
Display	2.8-inch color touch screen
Processor Speed	800 MHz
Memory	512 MB
Operating Systems	Windows, Mac, Linux
Scan Type	Flatbed
Fax Resolution	300 x 300 dpi
Mobile Printing	AirPrint
Scan Resolution	600 x 600 dpi