Lexmark MS331 - Printing a Font Sample List; Placing Separator Sheets between Copies; Canceling a Print Job

For Macintosh users
Using AirPrint
1 With a document open, choose File > Print.
2 Select a printer, and then from the drop-down menu following the Orientation menu, choose PIN Printing.
3 Enable Print with PIN, and then enter a four‑digit PIN.
4 Click Print.
5 From the printer control panel, release the print job. Navigate to:
Held jobs >
> select your computer name > >
Confidential
> >enter the PIN > > select
the print job >
> Print >
Using the print driver
1 With a document open, choose File > Print.
2 Select a printer, and then from the drop-down menu following the Orientation menu, choose Print and Hold.
3 Choose Confidential Print, and then enter a four‑digit PIN.
4 Click Print.
5 From the printer control panel, release the print job. Navigate to:
Held jobs >
> select your computer name > > Confidential > > > select the print job >
> enter the PIN > > Print >
Printing a font sample list
1 From the control panel, navigate to:
Settings >
> Reports > > Print > > Print Fonts >
2 Select a font sample, and then press .
Placing separator sheets between copies
1 From the control panel, navigate to:
Settings >
> Print > > Layout > > Separator Sheets > > Between Copies >
2 Print the document.
Canceling a print job
From the printer control panel
1 From the control panel, press twice, and then press .
2 Select a print job to cancel, and then press .
Print 35