Lexmark MS415dn Technical Reference

PJL messages for auto-continuable conditions
= Supported
X = Not supported
Printer model
Message Status code Return string
MS310, MS312,
MS315, MS410,
MS415, MS510,
MS610
MX310, MX410,
MX510, MX511
MX610, MX611
Intervention Required
-
PPDS Font Error
30014
PPDS font error
[50]
Intervention Required
-
Insufficient Collation
Area
30016
Insufficient
Collation Area
[37]
XXX
Intervention Required
-
Insufficient
Defragment Memory
30016
Insufficient
Defrag Memory
[37]
XXX
Intervention Required
-
Insufficient Memory
30016
Insufficient
memory, some
Held Jobs were
deleted [37]
Memory low, some
held jobs lost
[37]
*
XX
Intervention Required
-
Insufficient
Defragment Memory
30016
Insufficient
memory, some
Held Jobs were
deleted [37]
Intervention Required
-
Insufficient
Defragment Memory
30016
Insufficient
memory, some
Held Jobs will
not be restored
[37]
XXX
Intervention Required
-
Insufficient
Defragment Memory
30016
Insufficient
memory for Flash
Memory
Defragment
operation [37]
Cannot defrag
flash memory
[37]
*
XX
Intervention Required
-
Insufficient Collation
Area
30016
Insufficient
memory to
collate job [37]
Cannot collate
large document
[37]
*
XX
* This message applies only to two‑line printers.
Appendix B: PJL support 45

Lexmark MS415dn Specifications

General

Print Technology	Laser
Print Speed	Up to 40 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	800 MHz
Duplex Printing	Yes
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Mac OS, Linux
Memory	256 MB
Input Capacity	250 sheets
Connectivity	USB, Ethernet
Dimensions	10.3 x 15.7 x 15.0 inches