What to do if Lexmark Printer says defective flash memory?
To resolve the 'Defective flash memory' error on your Lexmark Printer, replace the defective flash memory card. You can also press on the printer control panel to ignore the message and continue printing, or cancel the current print job.
What to do if my Lexmark MS415dn says cartridge nearly low?
To resolve a 'Cartridge nearly low' message on your Lexmark Printer, you can press on the printer control panel to clear the message and continue printing, if necessary.
What to do if my Lexmark MS415dn Printer says cartridge low?
To resolve a 'Cartridge low' message on your Lexmark Printer, you may need to order a toner cartridge. If necessary, you can press on the printer control panel to clear the message and continue printing.
How to fix unformatted flash detected on Lexmark MS415dn?
To resolve the 'Unformatted flash detected' error on your Lexmark Printer, you can press on the printer control panel to stop the defragmentation and continue printing. You can also format the flash memory device.
How to fix replace imaging unit, 0 estimated pages remain on Lexmark MS415dn?
Replace the imaging unit to clear the message and continue printing.
What to do if Lexmark Printer says insufficient memory, some held jobs were deleted?
To resolve the 'Insufficient memory, some Held Jobs were deleted' message on your Lexmark Printer, press on the printer control panel to clear the message.
How to fix standard network software error on Lexmark MS415dn?
To address the 'Standard network software error' on your Lexmark Printer, you can press on the printer control panel to confirm. You can also try unplugging the router, waiting for 30 seconds, and then plugging it back in. Additionally, turn off the printer and then turn it back on. You might also need to update the network firmware in the printer or the print server. For more information, visit the Lexmark website.
How to fix replace unsupported cartridge on Lexmark Printer?
Remove the toner cartridge, and then install a supported one to clear the message and continue printing.
What to do if Lexmark MS415dn says imaging unit very low?
To resolve the 'Imaging unit very low, [x] estimated pages remain' message on your Lexmark Printer, you may need to replace the imaging unit very soon. For more information, see the “Replacing supplies” section of the User’s Guide.
What to do if Lexmark MS415dn Printer says reinstall missing or unresponsive imaging unit?
To address the 'Reinstall missing or unresponsive imaging unit' message on your Lexmark Printer, first check if the imaging unit is missing and install it if it is. If the imaging unit is already installed, remove and then reinstall it.
General| Print Technology | Laser |
|---|---|
| Print Speed | Up to 40 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Processor Speed | 800 MHz |
| Duplex Printing | Yes |
| Maximum Paper Size | 8.5 x 14 inches |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Memory | 256 MB |
| Input Capacity | 250 sheets |
| Connectivity | USB, Ethernet |
| Dimensions | 10.3 x 15.7 x 15.0 inches |
To Next Page
