Using the Push Button method
1
From the control panel, navigate to:
> Settings > > Network/Ports > > Wireless >
2 Select Wi‑Fi Protected Setup, and then press .
3 Select Start Push Button Method, and then press .
4 Follow the instructions on the display.
Using the personal identification number (PIN) method
1
From the control panel, navigate to:
> Settings > > Network/Ports > > Wireless >
2 Select Wi‑Fi Protected Setup, and then press .
3 Select Start PIN Method, and then press .
4 Copy the eight‑digit WPS PIN.
5 Open a web browser, and then type the IP address of your access point in the address
field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
6 Access the WPS settings. For more information, see the documentation that came with your access
point.
7 Enter the eight‑digit PIN, and then save the changes.
Deactivating the Wi‑Fi network
1 From the printer control panel, navigate to:
> Settings > > Network/Ports > > Network Overview > > Active Adapter > > Standard
Network >
2 Follow the instructions on the display.
Maintaining the printer 65
To Next Page
Loading...
