Lexmark Confidential
17
Compressed Print When Printing on 8.5” Media using A4 Fuser
• Most 220V printers are equipped with an A4 width fuser.
• When printing letter size paper on an A4 fuser, the image will be
slightly compressed to enforce 8mm margins on the left and right side
to ensure robust fusing. This is by design.
• As of firmware release P125/E215, there will be an option to crop the
image instead of compressing it. To make the change go to:
• Configuration Menu>A4 Fuser
• Select Compress (default) or Clip
• In addition, there will also be a letter width HV fuser available.
To Next Page
Loading...
