To Next PageTo Next Page
What to do if Lexmark MS810 Printer displays 'Load manual feeder with [custom string] [paper orientation]'?
If your Lexmark printer displays the message 'Load manual feeder with [custom string] [paper orientation]', load the feeder with the correct size and type of paper. Depending on your printer model, touch Continue or press to clear the message and continue printing. If needed, cancel the current job.
What to do if my Lexmark Printer says 'Load staples'?
If your Lexmark printer shows a 'Load staples' message, try these steps: 1. Replace or insert the specified staple cartridge in the finisher. 2. Alternatively, select Continue to clear the message and continue printing. 3. If you prefer to cancel the print job, select Cancel job.
What to do if my Lexmark MS810 displays 'Close door or insert cartridge'?
If your Lexmark printer displays the message 'Close door or insert cartridge', it means the toner cartridge is either missing or not installed correctly. To resolve this, insert the cartridge properly, and then ensure all doors and covers are securely closed.
How to resolve 'Check tray [x] connection' error on Lexmark MS810 Printer?
To resolve a 'Check tray [x] connection' error on your Lexmark printer, follow these steps: 1. Turn off the printer, and then turn it back on. 2. If the error appears again: * Turn off the printer. * Unplug the power cord from the electrical outlet. * Remove the specified tray. * Reattach the tray. * Connect the power cord to a properly grounded electrical outlet. * Turn the printer back on. 3. If the error persists: * Turn off the printer. * Unplug the power cord from the electrical outlet. * Remove the tray. * Contact customer support. 4. To clear the message and resume the job, select Continue on the printer control panel.
What to do if Lexmark Printer displays 'Load [paper source] with [custom string] [paper orientation]'?
If your Lexmark printer displays the message 'Load [paper source] with [custom string] [paper orientation]', load the tray or feeder with the correct size and type of paper. To use the tray that has the correct size or type of paper, select Finished loading paper on the printer control panel. Alternatively, cancel the current job.
What to do if my Lexmark MS810 Printer displays 'Disk full [62]'?
If your Lexmark printer displays the message 'Disk full [62]', you can try the following: * Select Continue to clear the message and continue printing. * Delete fonts, macros, and other data stored in the printer hard disk. * Install a printer hard disk with larger capacity.
Why does my Lexmark MS810 say 'Cartridge, imaging unit mismatch [41.xy]'?
The 'Cartridge, imaging unit mismatch [41.xy]' error on your Lexmark printer indicates a mismatch between the toner cartridge and imaging unit types. Check if the toner cartridge and imaging unit are both MICR (Magnetic Imaging Content Recording) or non-MICR supplies. Change the toner cartridge or imaging unit so that both are MICR or non-MICR supplies.
What does 'Imaging unit low [84.xy]' mean on my Lexmark MS810 Printer and what should I do?
If your Lexmark printer displays the message 'Imaging unit low [84.xy]', it indicates that you may need to order an imaging unit. If necessary, select Continue on the printer control panel to clear the message and continue printing.
What to do if my Lexmark MS810 displays 'Fuser kit near end of life [81.xx]'?
If your Lexmark printer displays the message 'Fuser kit near end of life [81.xx]', replace the fuser. You can also select Continue on the printer control panel to clear the message and continue printing.
What does 'Maintenance kit low [80.xy]' mean on my Lexmark Printer?
If your Lexmark printer displays 'Maintenance kit low [80.xy]' message, you may need to order a maintenance kit. For more information, contact customer support. If necessary, select Continue to clear the message and continue printing.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Speed | Up to 55 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 300, 000 pages |
| Processor Speed | 800 MHz |
| Standard Memory | 512 MB |
| Maximum Memory | 2560 MB |
| Connectivity | USB, Ethernet |
| Duplex Printing | Standard |
| Media Types Supported | Card Stock, Envelopes, Labels, Plain Paper, Transparencies |
| Maximum Paper Size | Legal |
| Operating System Compatibility | Windows, Mac, Linux |
| Input Capacity | 650 pages (Standard) |
| Maximum Paper Input | 4400 pages |
