Lexmark MS810 - Additional printer setup; Installing internal options

Skewed print
Action Yes No
Step 1
a Move the width and length guides in the tray to the correct positions for the
size of the paper loaded.
b Resend the print job.
Is the print still skewed?
Go to step 2. The problem is solved.
Step 2
a Check if you are printing on a paper that is supported by the tray.
b Resend the print job.
Is the print still skewed?
Contact
customer
support.
The problem is solved.
Streaked horizontal lines appear on prints
Action Yes No
Step 1
a Depending on your operating system, specify the tray or feeder from Printing
Preferences or the Print dialog.
b Resend the print job.
Do streaked horizontal lines appear on prints?
Go to step 2. The problem is solved.
Step 2
From the printer control panel, set the paper type and weight in the Paper menu
to match the paper loaded in the tray.
Do the paper type and weight match the type and weight of the paper in the
tray?
Go to step 3. Change the paper type
and weight to match the
paper loaded in the tray.
Print quality Guide
Page 13 of 19