• Allow the following recommended amount of space around the printer for proper ventilation:
1
2
3
4
5
1 Right side 305 mm (12 in.)
2 Front 508 mm (20 in.)
3 Left side 305 mm (12 in.)
4 Rear 305 mm (12 in.)
5 Top 115 mm (4.5 in.)
Moving the printer to another location
The printer and its hardware options can be safely moved to another location by following these precautions:
• Any cart used to move the printer must have a surface able to support the full footprint of the printer.
• Any cart used to move the hardware options must have a surface able to support the dimensions of the hardware options.
• Keep the printer in an upright position.
• Avoid severe jarring movements.
Shipping the printer
When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.
Moving Guide
Page 3 of 3
To Previous Page
Loading...
