• Load only one size and type of paper or specialty media at a time.
• Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.
• There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Without an optional staple finisher With an optional staple finisher
ABC
One‑sided printing
ABC
One‑sided printing
ABC
Two‑sided (duplex) printing
Two‑sided (duplex) printing
• Load envelopes with the flap side down and on the left of the multipurpose feeder.
B
5
EXEC
A4 A5
LT
R
Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick
adhesives. These envelopes may severely damage the printer.
Printing Guide
Page 15 of 16
To Next Page
Loading...
