4 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.
5 Load the paper stack with the printable side facedown.
Note: Make sure the paper or envelope is loaded properly.
• There are different ways for loading letterhead depending on whether an optional staple finisher is installed or not.
Without an optional staple finisher With an optional staple finisher
ABC
One‑sided printing One‑sided printing
ABC
Two‑sided printing
ABC
Two‑sided printing
• Do not slide the paper into the tray. Load paper as shown in the illustration.
Printing Guide
Page 4 of 16
To Next Page
Loading...
