Supported bar codes
116
Code 3 of 9 YYYYYYY Code 3 of 9 (also called Code 39 or AIM USS 39) is
the first alphanumeric code allowing the display of
digits from 0 to 9, 26 capital letters (A-Z) and seven
special characters (-.*$/+% and space).
Code 39 has no built-in checksum.
Code 3 of 9 + check
digit
YYYYYYY Code 39 optionally allows for a (Modulo 43) check
character in cases where data security is important.
Code 3 of 9
extended
YYYYYYY The Code 39 extended is a general-purpose code
which can code any ASCII character (any character
you can enter from the keyboard by normal means).
As with the standard 3 of 9 code, data can be of any
length.
Code 3 of 9
extended + check
digit
YYYYYYY Code 39 extended also optionally allows for a
(Modulo 43) check character in cases where data
security is important.
Code 93 YYYYYYY
2
Code 93 is a variable length symbology that can
encode the complete 128 ASCII character set.
Code 93 also incorporates two check digits as an
added measure of security.
Code 93 extendedYYYYYYY
2
Code 93 extended is similar to Code 93 except that
it allows the full 128 character ASCII character set
to be encoded.
Bar code name
Lexmark
Forms and Bar
Code Card v3.0
Lexmark
Forms and Bar
Code Card v3.1
Lexmark
Forms and Bar
Code Card v3.2
Lexmark
Forms and Bar
Code Card v3.3
LDSS Forms
Composer
v3.3.9
LDSS
Document
Producer
Lexmark
Optra Forms
Sample image Comments
1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code dictionaries
have been installed in Optra Forms.
2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms
when the bar code option is installed in
the printer, and the accompanying bar code dictionaries is installed in Optra Forms.
3 These bar codes are not available in PCL 5 or PostScript.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
