EasyManuals Logo

Lexmark MS812dn Technical Reference Manual

Lexmark MS812dn
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
Composite bar codes
64
c Product Code: The product code is a unique code assigned by the manufacturer. Unlike
the manufacturer code, which must be assigned by the UCC, the manufacturer is free to
assign product codes to each of their products without consulting any other organization.
Note: The product code is usually printed below the bar code.
d Check Digit: The check digit is an additional digit used to verify that a bar code has been
scanned correctly. Since a scan can produce incorrect data due to inconsistent scanning
speed, print imperfections, or a host of other problems, it is useful to verify that the rest of
the data in the bar code has been correctly interpreted. The check digit is calculated
based on the rest of the digits of the bar code. Normally, if the check digit is the same as
the value of the check digit based on the data that has been scanned, then there is a high
level of confidence that the bar code was scanned correctly.
Note: The check digit is usually printed to the right of the bar code.
2 UPC-E (including +2 and +5 variants)
UPC-E is a variation of UPC-A which allows for a more compact bar code by eliminating extra
zeros. Since the resulting UPC-E bar code is about half the size as an UPC-A bar code,
UPC-E is generally used on products with very small packaging where a full UPC-A bar code
cannot reasonably fit.
A UPC-E code contains the following:
Left-hand guard bars, or start sentinel, encoded as 101
Six data characters, encoded from the parity table above
Right-hand guard bars, encoded as 010101 (a center-guard bar pattern with a trailing
bar)

Table of Contents

Other manuals for Lexmark MS812dn

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark MS812dn and is the answer not in the manual?

Lexmark MS812dn Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)4 s
Print margins (top, bottom, right, left)4.2 mm
Print speed (black, normal quality, A4/US Letter)66 ppm
Duplex print speed (black, normal quality, A4/US Letter)40 ppm
Security algorithms802.1x RADIUS, EAP-TLS, EAP-TTLS, LEAP, MD5, PEAP
Supported network protocols (IPv4)TCP, UDP, AppleTalk, LPR/LPD, Direct IP, FTP, TFTP, ThinPrint, IPP
Printing colorsBlack
Country of originChina
Maximum duty cycle300000 pages per month
Recommended duty cycle5000 - 50000 pages per month
Number of print cartridges1
Page description languagesMicrosoft XPS, PCL 5e, PCL 6, PDF 1.7, PostScript 3, PPDS, XHTML
Maximum internal memory2560 MB
Sound power level (standby)32 dB
Sound pressure level (printing)58 dB
Sound pressure level (quiet mode)53 dB
Total input capacity550 sheets
Maximum input capacity4400 sheets
Total number of input trays2
Maximum number of input trays6
Multi-Purpose tray input capacity100 sheets
Envelopes sizes7 3/4, 9, 10, B5, C5, DL
Maximum print size216 x 356 mm
Paper tray media typesCard stock, Envelopes, Labels, Plain paper
Paper tray media weight60 - 176 g/m²
Non-ISO print media sizesExecutive (184 x 267mm), Folio (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm), Legal (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
JIS B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Standard interfacesUSB 2.0
Optional connectivityParallel, Serial (RS-232), Wireless LAN
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Other operating systems supportedNovell NetWare 5.x, Novell NetWare 6.x, Novell Open Enterprise Server
Server operating systems supportedWindows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64
Power consumption (off)0.5 W
Power consumption (standby)4.1 W
Power consumption (printing)830 W
Package weight27430 g
Networking featuresGigabit Ethernet
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Compatible operating systemsWindows XP (32/64bit)\\r Windows Vista (32/64bit)\\r Windows 7 (32/64bit)\\r Mac OS X 10.5, 10.6, 10.7, 10.8\\r SUSE Linux Enterprise Server 10, 11\\r SUSE Linux Enterprise Desktop 10, 11\\r Red Flag Linux Desktop 6.0\\r Linpus Linux Desktop 9.6\\r Debian GNU/Linux 5.0, 6.0\\r Red Hat Enterprise Linux WS 4.0, 5.0, 6.0\\r Ubuntu Linux 11.04, 11.10, 12.04\\r openSUSE Linux 11.3, 11.4, 12.1\\r PCLinuxOS 2011.9\\r Mint Linux 9, 10, 11, 12\\r Fedora Linux 14, 15\\r Unix Sun Solaris SPARC 9, 10\\r Unix HP-UX 11.11, 11.23, 11.31\\r Unix Sun Solaris x86 10, 11\\r Unix IBM AIX 5.3, 6.1, 7.1
Compliance industry standardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Sustainability certificatesENERGY STAR
DisplayLCD
CertificationRAL-UZ, CAN/CSA, ICES, BSMI, CNS, VCCI, FCC, UL, IEC, CE, CB, GS (TÜV), SEMKO, C-tick, CCC, CISPIR, EK, ECMA, TED
Product colorGrey, White
Operating altitude0 - 2896 m
Operating temperature (T-T)16 - 32 °C
Operating relative humidity (H-H)8 - 80 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)425 x 510 x 419 mm

Related product manuals