Lexmark MX310dn Manual

Supported language notes
• All printer types support “raw” as the language type. This makes the print queue a pass-through queue.
This means the print job is sent to the printer without any queue modification.
• The Automatic language type lets you set the language type to be automatic, pcl, or ps. If you select
automatic, you can send both PCL emulation/ASCII and PostScript emulation print jobs to the print queue.
• The Automatic Plus language type lets you set the language type to be automatic_plus, pcl, ps, or
iq. If you select automatic_plus, you can send PCL emulation/ASCII, PostScript emulation, and
ImageQuick
TM
(HTML, PDF, TIFF) print jobs to the print queue.
• The Automatic PDF language type lets you set the language type to be automatic_pdf, pcl, ps, or
pdf. If you select automatic_pdf, you can send PCL emulation/ASCII, PostScript emulation, and PDF print
jobs to the print queue.
• If the language type is pcl, you can send only ASCII text or PCL emulation jobs through the print queue.
• If the language type is ps, you can send only PostScript emulation jobs through the print queue.
• If the language type is ppds, you can only send ASCII text or PPDS emulation jobs through the print queue.
• You should normally choose automatic, if it is available.
c Available printer settings options can be found by running the lsqueue_opts command. Using the Printer
Type as determined in step b on page 19, run the following command:
# /usr/lexprint/bin/lsqueue_opts -f printer_type
Example: # /usr/lexprint/bin/lsqueue_opts -f 10LT63x
Locate the options and values you want to change and pass them the mkqueue command with the -o
argument.
2 Type the following command:
# /usr/lexprint/bin/mkqueue -d device_name -q queue_name
-p printer_type -l printer_language -o printer_options
Note: Type mkqueue -h from the command line for more details regarding this command.
Example: Using information gathered in step 1 on page 19, create a new print queue (“myqueue”), for a virtual
device (“mydevice”). The printer type is 10LT63x and the language selection is specified as “automatic” for this
queue. Specify additional printer options so that paper from the second tray is used and jobs are duplexed against
the long edge of the paper.
# /usr/lexprint/bin/mkqueue -d mydevice -q myqueue -p 10LT63x
-l automatic -o "paper_tray=tray2 duplex=long_edge"
Changing the print queue status
There are four print queue states:
• Enabled—The normal state of the operation. Jobs in the queue are actively processed.
• Disabled—Print job processing stops. New jobs can be submitted, but they are not processed.
• Accepting—Print jobs can be submitted to the queue.
• Rejecting—No print jobs can be submitted to the queue.
These states are not all mutually exclusive. For example, an enabled queue may reject jobs.
20

Lexmark MX310dn Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	6.5 s
Print speed (black, normal quality, A4/US Letter)	33 ppm
Duplex print speed (black, normal quality, A4/US Letter)	14 ppm
Finishing option	No
All-in-one functions	Copy, Fax, Print, Scan
Supported media weight(s)	60 - 90 g/m²
Color all-in-one functions	Scan
Package dimensions (W x D x H)	19.09 x 21.65 x 22.48 \
Supported media weight (imperial)	24 lbs
Country of origin	China
Maximum duty cycle	50000 pages per month
Recommended duty cycle	250 - 6000 pages per month
Page description languages	Microsoft XPS, PCL 5e, PCL 6, PDF 1.7, PostScript 3, PPDS
Copier resize	25 - 400 %
Copy speed (black, normal quality, A4)	33 cpm
Scanner type	Flatbed & ADF scanner
Maximum scan area	216 x 356 mm
Duplex scan speed (black)	43 ppm
Duplex scan speed (color)	20 ppm
Optical scanning resolution	600 x 1200 DPI
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Fax transmission speed	3 sec/page
Total input capacity	300 sheets
Total output capacity	150 sheets
Maximum input capacity	850 sheets
Total number of input trays	2
Maximum number of input trays	3
Auto document feeder (ADF) input capacity	50 sheets
Envelopes sizes	7 3/4, 9, 10, DL
Maximum print size	-
Paper tray media types	Card stock, Envelopes, Labels, Plain paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
JIS B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Display	LCD
Display diagonal	2.4 \
Market positioning	Business
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
USB 2.0 ports quantity	1
Supported network protocols (IPv4)	TCP/IP, AppleTalk, TCP, UDP
Supported network protocols (IPv6)	TCP/IP
Internal memory	256 MB
Processor frequency	800 MHz
Sound pressure level (copying)	54 dB
Sound pressure level (printing)	53 dB
Sound pressure level (scanning)	55 dB
Sound pressure level (duplex printing)	52 dB
Power consumption (average operating)	- W
Package depth	550 mm
Package width	485 mm
Package height	571 mm
Package weight	22500 g
Operating altitude	0 - 2896 m
Operating temperature (T-T)	16 - 32 °C
Operating relative humidity (H-H)	8 - 80 %
Mac operating systems supported	Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion
Other operating systems supported	Novell NetWare 5.x, Novell NetWare 6.x, Novell Open Enterprise Server
Server operating systems supported	Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64
Sustainability certificates	ENERGY STAR
Certification	Blue Angel (RAL-UZ-122), CAN/CSA-C22.2 60950-1, CSA E60825-1, ICES-003 B, BSMI B, CNS 13438, VCCI B, US FDA, FCC B, UL 60950-1, IEC 320-1, EN/IEC 60320-1, CE B, CB IEC 60950-1, EN 62311, EN 60950-1, EN/IEC 61000-3, EN 55022 B, EN 55024, EN/IEC 60825-1, GS (TÜV), SEMKO, UL AR, CS, TÜV Rh, SMA C-tick B, CCC B, CISPIR 22 B, EK Mark, N Mark, ECMA-370, TED

Weight and Dimensions

Depth	472 mm
Width	399 mm
Height	468 mm
Weight	20000 g