Lexmark MX532 - Cloud Services

Menu item Description
Print Permission
O*
On
Let the user log in before printing.
Default Print Permission Login
PIN*
User Name/Password
User Name
Set the default login for Print Permission.
Security Reset Jumper
Enable “Guest” access*
No Eect
Specify user access to the printer.
Notes:
• Enable "Guest" access allows for device recovery if the admin password
is lost. If this issue occurs, then contact customer support.
• No
eect
prevents using the security jumper for device recovery.
• This menu item appears only when an actual security jumper hardware is
installed.
Use Intelligent Storage Drive for
User Data
O
On*
Enable intelligent storage drive to store user data.
Note: This menu item appears only when an intelligent storage drive is
installed.
Minimum Password Length
0–32 (0*)
Specify the password length.
Enable Password/PIN Reveal
O*
On
Show the password or personal identification number.
Note: An asterisk (*) next to a value indicates the factory default setting.
Cloud Services
Cloud Services Enrollment
Menu item Description
View More Information View additional information on the usage of Lexmark Cloud
Services.
Enable communication with Lexmark Cloud
Services
O*
On
Enable the printer to communicate with Lexmark Cloud Services.
View Current Status View the connection status between the printer and Lexmark
Cloud Services.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 173