9 Close the ISP kit, and then install the screw.
10 Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
11 Turn on the printer.
Installing the convenience stapler
1 Turn
o
the printer.
2 Unplug the power cord from the electrical outlet, and then from the printer.
3 Unpack the convenience stapler.
4 Remove the column covers.
Note: Do not throw away the column covers.
Set up, install, and configure 63
To Next Page
Loading...
