Lexmark MX710 - Page 10

b If the A5 length guide is still attached to the length guide, then
remove it from its place. If the A5 length guide is not attached,
then proceed to step d.
c Put the A5 length guide in its holder.
2
1
d Squeeze, and then slide the length guide to the correct position
for the paper size you are loading.
L
G
L
O
F
C
F
O
L
I
O
LT
R
A
4
A
5
3 Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
surface.
4 Load the paper stack with the printable side facedown for
one‑sided printing.
• Make sure the paper is loaded properly.
One‑sided printing Two‑sided (duplex) printing
AB
C
A
B
C
10