• If you are loading envelopes, then make sure that the flap side
is facing up and the envelopes are on the left side of the tray.
• Make sure the paper is below the maximum paper fill indicator.
Warning—Potential Damage: Overfilling the tray can cause
paper jams.
6 For custom‑ or Universal‑size paper, adjust the paper guides to
lightly touch the sides of the stack, and then lock the length guide.
7 Insert the tray.
8 From the printer control panel, set the paper size and paper type
in the Paper menu to match the paper loaded in the tray.
Note: Set the correct paper size and type to avoid paper jams
and print quality problems.
Loading the 2100‑sheet tray
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each tray separately. Keep all other
trays closed until needed.
1 Pull out the tray completely.
2 Adjust the width and length guides.
8
To Next Page
Loading...
