EasyManua.ls Logo

Lexmark MX710 - Page 26

Lexmark MX710
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
surface.
3 Reload paper into the multipurpose feeder.
4 Slide the paper guide until it rests lightly against the edge of the
paper.
5 From the printer control panel, touch Done to clear the message
and continue printing.
[x]page jam, open automatic feeder top
cover. [28y.xx]
1 Remove all original documents from the ADF tray.
Note: The message is cleared when the pages are removed from
the ADF tray.
2 Open the ADF cover.
3 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
4 Close the ADF cover.
5 Open the scanner cover.
26

Other manuals for Lexmark MX710

Related product manuals