PJL
3-48
Common Variables for PostScript Emulation
Note: The word common applies to those variables common to both your printer
and the Hewlett-Packard Company’s LaserJet printers.
Use these variables only for PostScript emulation. The
[command modifier:value]
parameter should be specified as LPARM:POSTSCRIPT. For example:
@PJL SET LPARM:POSTSCRIPT JAMRECOVERY=OFF[<CR>]<LF>
To determine which variables your printer supports, see Table B-5: “Common
Variables for PostScript Emulation” on page B-12.
LFONTCOMPATIBILITY Font Compatibility
Level
PCL5, PCL6 PCL6
LFONTPRIORITY
(SET only)
Font Priority Search RESOLUTION, NORESOLUTION
When RESOLUTION is specified, your printer is
compatible with the Hewlett-Packard Company’s
LaserJet printers.
When NORESOLUTION is specified, font
resolution is removed from the font selection
priority criteria.
RESOLUTION
Table 3-7: Common Variables for PostScript Emulation
Variable Function Selections
Factory
Default
JAMRECOVERY Jam Recovery ON, OFF
For queries, when the Jam Recovery setting is set
toAuto,PJLreturnsthevalueofOFF.The
remaining two Jam Recovery values, On and Off
are returned by PJL as ON and OFF respectively.
When PJL is used to set Jam Recovery OFF, the
settingisactuallysettoAuto.WhenPJLisusedto
set Jam Recovery ON, the setting is set to ON.
Changing this variable also affects PCL emulation.
OFF
PRTPSERRS Print PS Errors ON, OFF OFF
Table 3-6: Printer Unique Variables for PCL Emulation (Continued)
Variable Function Selections Factory Default
To Next Page
Loading...
Need help?
General