Memory
6-5
Part Number
Part Number as it is stored in the flash memory card header. If the flash memory is
formatted by the printer, the part number field is shown as (none). The part number
field for the disk is not printed.
Write Password Protected
Indicates the entire flash memory or disk is write-protected.
If the device is read/write protected, "Read/Write password protected" is
printed. If the device is write-protected, "Write protected" is printed. If the device
is not protected, this line is blank.
For more information, see “File and Device Protection Commands” on page 3-86 and
“Password Protection” on page 6-7.
ID
Valid for PCL emulation macros, fonts, and symbol sets only. The ID must be used
when adding a description to a macro or a symbol set. If two files with the same file
type have duplicate IDs, the following occurs:
• If multiple macros or symbol sets have been created with duplicate download
IDs, only the last macro or symbol set is listed. It is the only one that can be
selected. On flash memory, the number listed for bytes unavailable
includes the unlisted macros and symbol sets. The bytes unavailable
field is not applicable for the disk device.
• PostScript emulation fonts, and files created by PostScript emulation file
operators, do not have IDs.
To Next Page
Loading...
Need help?
General