Lexmark Optra T User Manual

PCL Support
A-5
ESC
*o#W[data] Driver Configuration Command 2-52
✓✓✓✓✓✓✓✓✓✓
ESC
*p#P Push / Pop Palette 2-52
✓✓✓✓✓✓✓✓✓✓
ESC
*p#R Set Pattern Reference Point 2-48
✓✓✓✓✓✓✓✓✓✓
ESC
*p#X Horizontal Cursor Position (in PCL Units) 2-41
✓✓✓✓✓✓✓✓✓✓
ESC
*p#Y Vertical Cursor Position (in PCL Units) 2-42
✓✓✓✓✓✓✓✓✓✓
ESC
*r#A Start Raster Graphics 2-50
✓✓✓✓✓✓✓✓✓✓
ESC
*r#F Raster Graphics Presentation Mode 2-50
✓✓✓✓✓✓✓✓✓✓
ESC
*r#S Raster Width (Source) 2-50
✓✓✓✓✓✓✓✓✓✓
ESC
*r#T Raster Height (Source) 2-50
✓✓✓✓✓✓✓✓✓✓
ESC
*r#U Simple Color 2-52
✓✓✓✓✓✓✓✓✓✓
ESC
*rB End Raster Graphics (Version B) 2-51
✓✓✓✓✓✓✓✓✓✓
ESC
*rC End Raster Graphics (Version C) 2-51
✓✓✓✓✓✓✓✓✓✓
ESC
*s#I Inquire Status Readback Entity 2-54
✓✓✓✓✓✓✓✓✓✓
ESC
*s1M Free Space 2-54
✓✓✓✓✓✓✓✓✓✓
ESC
*s#T Set Status Readback Location Type 2-54
✓✓✓✓✓✓✓✓✓✓
ESC
*s#U Set Status Readback Location Unit 2-54
✓✓✓✓✓✓✓✓✓✓
ESC
*s#X Echo 2-54
✓✓✓✓✓✓✓✓✓✓
ESC
*t#H Raster Width Destination 2-51
✓✓✓✓✓✓✓✓✓✓
ESC
*t#I Gamma Correction 2-53
✓✓✓
✘
✓✓✓✓✓✓
ESC
*t#J Render Algorithm 2-53
✓✓✓✓✓✓✓✓✓✓
ESC
*t#R Raster Resolution 2-50
✓✓✓✓✓✓✓✓✓✓
ESC
*t#V Raster Height Destination 2-51
✓✓✓✓✓✓✓✓✓✓
ESC
*v#A Color Component One 2-53
✓✓✓✓✓✓✓✓✓✓
ESC
*v#B Color Component Two 2-53
✓✓✓✓✓✓✓✓✓✓
ESC
*v#C Color Component Three 2-53
✓✓✓✓✓✓✓✓✓✓
Table A-1: PCL Emulation Commands (Continued)
✓ Supported
✘ Not Supported
Command
Page numbers reference command descriptions. Printer Model
Function Page
Optra Color 45 Optra Color 1200 Optra E310, E312 Optra C710 Optra M410, M412 Optra T610 Optra T612 Optra T614 Optra T616 Optra W810

Lexmark Optra T Specifications

General

Brand	Lexmark
Model	Optra T
Category	Printer
Language	English