Interfaces
8-21
AUTOFD* Receiver for the Lexmark E230, E232, E330, E332n, and E234(n)
The following diagram illustrates the AUTOFD* receiver for the Lexmark E230, E232,
E330, E332n, and E234(n).
DATA 1-8 Signal Driver/Receivers for the Lexmark C510
The following diagram illustrates each of the DATA 1-8 signal driver/receivers for the
Lexmark C510.
FCT 2827
690 pF ±10%
+5V, 5%
GND
Connector
Pin
56 ohm ±5%
1.1K ohm ±10%
FCT 2828
or
FCT 2245
150 pF ±20%
+5V, 5%
GND
Connector
Pin
33 ohm ±5%
2.2K ohm ±10%
To Next Page
Loading...
